Aim-TTi MX180T Power Supply Triple multi range 375W

The Aim-TTi MX180T has two outputs each capable of 0 to 30V at 0 to 6A, plus a third output of 0 to 5.5V at 0 to 3A.

Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.

Mixed-mode regulation

To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.
Excellent line and load regulation is matched by low noise and good transient response.

Range switching and power control

To increase its ability to match a variety of applications, each output has more than one range.

Outputs one and two can provide either 60V/3A or 15V/10A as an alternative to 30V/6A, while output three can provide 12V/1.5A.

When higher power is required, outputs one and two can be combined internally to provide up to 360 watts as either 30V/12A, 15V/20A, 60V/6A or 120V/3A from a single output.

Remote control for system applications

The MX180TP incorporates USB, RS232 and LXI compliant LAN interfaces with GPIB available as an option.

These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

Duplicate power and sense terminals are incorporated at the rear.

The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.

A 3U rack mount suitable for one or two units is available.

For more information: Aim-TTi MX Series