+45 31 33 18 19
salg@GOmeasure.dk

Aim-TTi PL303QMD Power Supply 2 x 0-30V/0-3A

Aim-TTi PL303QMD Power Supply 2 x 0-30V/0-3A

5.970,00 kr.

  • Single, dual or triple output models
  • Models from 6V/8A up to 60V/1.5A
  • Linear regulation – for the best performance
  • Ultra-compact design – uses up less space
  • True Analogue controls – for ease of use
  • S-Lock function – instantly lock settings
  • V-Span function – customize the voltage range
  • Low current range and current meter averaging
  • DC output switches and “view limits” button
  • Selectable remote sense terminals
  • Independent, Isolated Tracking, Ratio Tracking  and True Parallel modes on dual & triple models
  • High current low voltage output on triple output model
SKU: PL303QMD Categories: , Tag:

Aim-TTi PL303QMD Power Supply 2 x 0-30V/0-3A

Compact Dimensions

The Aim-TTi PL303QMD is a dual output power supply with the same high power density as the single output models – 180 watts from a half rack 3U sized casing (214mm x 131mm).

Four Modes of Operation

The PL303QMD is more than just two PL303 single power supplies in one box. It has four modes of operation: Independent, Isolated Tracking, Isolated Ratio Tracking, and True Parallel.

Independent Mode: The two outputs are completely independent and electrically isolated from each other.

Isolated Tracking Mode: The two outputs remain electrically isolated, but the voltage control of the Master output sets an identical voltage on the Slave output

Isolated Ratio Tracking Mode: As normal tracking, but the Slave voltage can be set to any percentage of the Master voltage and retains that ratio as the Master voltage is varied.

True Parallel Mode: All of the power is channelled to the Master output which can then supply up to 6 amps.

Simultaneous Output Control

The Both On/Both Off buttons are in addition to the individual switches for each output, and allow both outputs to be turned on or off synchronously by a single button press. Synchronous switching of the outputs is of increasing importance for circuitry which can be damaged if one voltage rail is present without the other.

Building on the success of a winning formula

In the 1980s the original PL series transformed customer expectations of the bench power supply and set a format that has been extensively copied by other manufacturers. Over the years, the PL series has been steadily revised and extended. Hundreds of thousands of PL series units are currently in use across the world and it remains the laboratory power supply of choice for many organisations.

TTi has been at the forefront of laboratory power supply design for around thirty years during which it has re-defined the state-of-the-art for switch mode products with its innovative Mixed-mode and PowerFlex regulator designs. Continuing development of linear models has generated the lower cost EL series, and the advanced QL series. However, demand for the PL series has remained strong – demonstrating how well it has met the needs of its many customers. Now TTi has engineered an all-new design which retains all the key features of the original PL series, but combines them with new and important features.

For more information: Aim-TTI PL Series

Aim-TTi PL303QMD Power Supply 2 x 0-30V/0-3A

Aim-TTi PL + PL-P Series Datasheet

Additional information

Producent

Aim-TTi

Produktkategori

DC Power Supplies, Sources & Supplies

DC AC

DC

Effekt

180 W

Spaending

30 V

Stroem

6 A

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more