+45 31 33 18 19

Aim-TTi TG330 3MHz Function Generator

Aim-TTi TG330 3MHz Function Generator

3.500,00 kr.

  • 0.03Hz to 3MHz frequency range
  • Simultaneous display of frequency & amplitude
  • High waveform quality at all frequencies & levels
  • 2mV to 20V pk-pk from 50 Ohms or 600 Ohms
  • Variable symmetry with constant frequency
  • Auxiliary TTL/CMOS output
  • 1000:1 frequency change by vernier or sweep voltage
SKU: TG330 Categories: , Tag:

Aim-TTi TG330 3MHz Function Generator

The Aim-TTI TG330 is a Analog Function Generator with LCD readout 3MHz Generator, Counter, Sweep and AM

A state-of-the-art instrument

The function generator is one of the most versatile pieces of test & measurement instrumentation available.
It can generate a variety of precision waveshapes over a range of frequencies from mHz to MHz. It can provide a wide range of controlled amplitudes from a low-impedance source, and maintain constant amplitude as the frequency is varied.
Voltage control of frequency enables a source of swept frequency to be generated for frequency response testing. Modulation can also be added.
The TG300 series represents the stateof-the-art in low-cost analogue function generators.  0.03Hz to 3MHz frequency range  Simultaneous display of frequency & amplitude  External 7 digit 120MHz frequency counter (not TG315)  Very high waveform quality at all frequencies & levels  2mV to 20V pk-pk from 50 or 600  Auxiliary TTL/CMOS output  Variable symmetry with constant frequency  Variable DC offset with zero detent  1000:1 frequency change by vernier or sweep voltage  Precision internal linear or logarithmic sweep (TG330)  Internal or external amplitude modulation (TG330).

Exceptional waveform quality

The TG300 series provides very high waveform quality under all conditions.
That means low sinewave distortion, low aberration triangle waves and fast-edged square waves with low overshoot.
Unlike many competitive products good waveform quality is maintained throughout the frequency range and at low output levels.

Variable symmetry for pulse and ramp waveforms

The TG300 series provides bi-directional variable symmetry from 1:9 to 9:1. Unlike some products, frequency is independent of symmetry setting.

Wide range level control

The TG300 series provides a main output with a maximum emf of 20V pk-pk from a 50Ω or 600Ω source.
An amplitude vernier with a range of 20dB is combined with two switched attenuators of -20dB and -40dB to provide levels down to 2mV pk-pk unterminated.
Variable DC offset of ±10V is available via a centre detent control. An auxiliary output provides a fixed 0V to +5V level suitable for driving both TTL and CMOS loads.

Wide sweep range

Each range can be swept by at least 1000:1 either manually or via the external sweep input.

For more information: Aim-TTi

Aim-TTi TG330 Function Generator

AIM-TTi TG300 Series Datasheet

Additional information




Arbitrary Function Generators, Signal Generators

Frequency Range

3 MHz


1 Channel

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more