+45 31 33 18 19

Anritsu MS2690A Signal Analyzer

Anritsu MS2690A Signal Analyzer

Price on request

  • Frequency range: 50 Hz to 6 GHz
  • Analysis bandwidth
    – 31.25 MHz (standard)
    – 62.5 MHz/125 MHz (option)
  • Supports 5G NR (sub-6 GHz) TDD/FDD
    Wide measurement dynamic range EVM performance: <0.5%
    One-button dynamic-range optimization at EVM measurement
  • Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE 802.11ac etc. (with optional software)
  • One-Box Tester with the addition of the Signal Generator option
  • Batch capture measurements for the fastest analysis time
  • Supports Noise Figure measurement (option)
Categories: , Tag:

Anritsu MS2690A Signal Analyzer

Signal Analysis will never be the same again

The Anritsu MS2690A is a part of the MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz/125 MHz/162.5 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification. These boxes are superlative in every way — they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, BER measurement and Noise Figure measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, and WLAN IEEE 802.11a/b/g/j/n/p/ac, etc. , LTE/LTE-Advanced (FDD/TDD), 5G.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz/125 MHz/162.5 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.

For more information: Anritsu

Anritsu MS2690A Signal Analyzer

Anritsu MS2690A Datasheet

Anritsu MS2690A Signal Analyzer

Communication System Applicable Software
 Basic Digital Signal Analysis  Vector Modulation Analysis Software
 5G NR (TDD)  (UPDATED)  5G NR TDD sub-6GHz Downlink Measurement Software
5G NR TDD sub-6GHz Uplink Measurement Software
 LTE/LTE-Advanced (FDD)  LTE Downlink Measurement Software
LTE-Advanced FDD Downlink Measurement Software
LTE Uplink Measurement Software
LTE-Advanced FDD Uplink Measurement Software
LTE IQproducer
LTE-Advanced FDD Option
 LTE/LTE-Advanced (TDD)  LTE TDD Downlink Measurement Software
LTE-Advanced TDD Downlink Measurement Software
LTE TDD Uplink Measurement Software
LTE-Advanced TDD Uplink Measurement Software
LTE TDD IQproducer
LTE-Advanced TDD Option
 GSM/EDGE Measurement Software
EDGE Evolution Measurement Software
W-CDMA/HSPA Downlink Measurement Software
W-CDMA/HSPA Uplink Measurement Software
 W-CDMA BTS  W-CDMA BS Measurement Software
 CDMA2000/1xEV-DO  EV-DO Forward Link Measurement Software
All Measure Function
CDMA2000 Forward Link Measurement Software
All Measure Function
 TD-SCDMA  TD-SCDMA Measurement Software
 WLAN  WLAN (802.11) Measurement Software
802.11ac (160 MHz) Measurement Software
WLAN IQproducer
802.11ac (80 MHz) Option
 TDMA Type (PHS, ETC/DSRC, Digital LMR etc.)  TDMA IQproducer
 ETC/DSRC  ETC/DSRC Measurement Software
 Composite Waveforms for Signal Generator Option  Multi-Carrier IQproducer

Hardware Options Remarks
 Rubidium Reference Oscillator  Aging rate ±1 × 10– 10/month
 Wideband Analysis Hardware  Extends the analysis bandwidth to 125 MHz
 Analysis Bandwidth Extension  Extends the analysis bandwidth to 62.5 MHz/125 MHz
 6 GHz Preamplifier  100 kHz to 6 GHz
 Vector Signal Generator  125 MHz to 6 GHz
 Extension of Preselector Lower Limit to 3 GHz  Extends lower limit of pre-selector to 3 GHz
 Noise Figure Measurement Function  Y-factor method using a noise source

Additional information




Analyzers, Spectrum Analyzers

Frequency Range

50 Hz, 6 GHz

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more