+45 31 33 18 19

Anritsu MS2691A 13.5GHz Signal Analyzer

Anritsu MS2691A 13.5GHz Signal Analyzer

Price on request

Signal Analyzers MS2691A

Frequency range: 50 Hz to 6 GHz
Analysis bandwidth
31.25 MHz (standard)
62.5 MHz/125 MHz (option)

Offers modulation analysis, such as LTE/LTE-Advanced (FDD/TDD), WLAN IEEE 802.11ac etc. (with optional software)
One-Box Tester with the addition of the Signal Generator option
Batch capture measurements for the fastest analysis time
Supports Noise Figure measurement (option)

Categories: , Tag:

Anritsu MS2691A 13.5GHz Signal Analyzer

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way — they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.

Anritsu MS2691A 13.5GHz Signal Analyzer

Anritsu MS2691A Datasheet

Anritsu MS2691A 13.5GHz Signal Analyzer

Basic Digital Signal Analysis
Vector Modulation Analysis Software
LTE/LTE-Advanced (FDD)  LTE Downlink Measurement Software
LTE-Advanced FDD Downlink Measurement Software
LTE Uplink Measurement Software
LTE-Advanced FDD Uplink Measurement Software
LTE IQproducer
LTE-Advanced FDD Option
LTE/LTE-Advanced (TDD)  LTE TDD Downlink Measurement Software
LTE-Advanced TDD Downlink Measurement Software
LTE TDD Uplink Measurement Software
LTE-Advanced TDD Uplink Measurement Software
LTE TDD IQproducer
LTE-Advanced TDD Option
GSM/EDGE Measurement Software
EDGE Evolution Measurement Software
W-CDMA/HSPA Downlink Measurement Software
W-CDMA/HSPA Uplink Measurement Software
W-CDMA BS Measurement Software
EV-DO Forward Link Measurement Software
All Measure Function
1xEV-DO Reverse Receiver Test Waveform Pattern
CDMA2000 Forward Link Measurement Software
TD-SCDMA Measurement Software
Mobile WiMAX
Mobile WiMAX Measurement Software
Mobile WiMAX IQproducer
WLAN (802.11) Measurement Software
802.11ac (160 MHz) Measurement Software
WLAN IQproducer
802.11ac (80 MHz) Option
TDMA Type (PHS, ETC/DSRC, Digital LMR etc.)
TDMA IQproducer
ETC/DSRC Measurement Software
Composite Waveforms for Signal Generator Option
Multi-Carrier IQproducer

Additional information




Analyzers, Spectrum Analyzers

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more