+45 31 33 18 19
salg@GOmeasure.dk

Hioki CT6876 AC/DC Current Sensor

Hioki CT6876 AC/DC Current Sensor

Price on request

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6876 is a DC to 1.5MHz/1000A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners and other next generation devices. CAT III 1000 V

SKU: CT6876 Categories: , Tag:

Hioki CT6876 AC/DC Current Sensor

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6876 is a DC to 1.5MHz/1000A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners and other next generation devices. CAT III 1000 V

Key Features

• The ideal current sensor for measuring large1000 A currents in EV, HEV, and PHEV

• Strengthened shield improves noise resistance to accurately measure current buried in noise

• Flat frequency characteristics and CMRR performance to achieve high accuracy measurement

• More enhanced environmental resistance performance than ever before with operating temperature range of -40 to 85°C

• Basic accuracy of ± 0.04% and phase ± 0.1°

• Good frequency characteristics over wide band of DC to 1.5 MHz (amplitude) and DC to 1 MHz (phase)

• Ideal for advanced fields such as photovoltaics and fuel cells to evaluate the charge / discharge of batteries and secondary side of inverters

• Connect with oscilloscopes or Hioki Memory HiCorders (using SENSOR UNIT) to monitor waveforms

 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Rated current 1000 A AC/DC
Max. allowable input Within the derating range, up to ±1800 Apeak (design value) allowed at 40°C or less for 20 ms or less
Frequency bandwidth Amplitude: DC to 1.5 MHz (CT6876), DC to 1.2 MHz (CT6876-01)
Phase: DC to 1 MHz
Basic accuracy (DC, 45 Hz ≤ f ≤ 66 Hz) Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.1°
Output voltage rate 2 mV / A rated (This device outputs AC+DC voltage via the Sensor Unit. Use with voltage input equipment with high input impedance such as 1 MΩ)
Max. rated voltage to earth 1000 V AC/DC (50/60 Hz, CAT III )
Core diameter φ 36 mm (1.42 in)
Operating temperature, humidity -40°C to +85°C (-40°F to 185°F), 80% RH or less (with no condensation)
Power supply Power suppled via the Power Analyzer PW6001, PW3390, or Sensor Unit CT9555, CT9556, CT9557
Max. rated power 7.5 VA max. (at 1000 A/55 Hz)
Dimensions and mass 160 mm (6.30 in)W × 112 mm (4.41 in)H × 50 mm (1.97 in)D, CT6876: 950 g (33.5 oz), cable length 3 m (9.84 ft), CT6876-01: 1250 g (44.1 oz), cable length 10 m (32.81 ft)
Accessories Instruction manual ×1, Mark bands ×6, Operating precautions ×1

Compatible models

Compatible models CT6876
Power Analyzer PW6001, PW3390 Ok
Power Analyzer 3390 Attention (Requires CT9901)
CT ratio 2
Power HiTester 3193 series Attention (Requires CT9901)
CT ratio 2
Current Unit 8971 Attention (Requires the 9318, CT9901) CT ratio 2

Hioki CT6876 AC/DC Current Sensor

Hioki CT6876 Datasheet

Hioki CT6876 AC/DC Current Sensor

CT6876 1000 A AC/DC, ME15W terminal, 3 m (9.84 ft) cable length
CT6876-01 1000 A AC/DC, ME15W terminal, 10 m (32.81 ft) cable length

Additional information

Producent

Hioki

Produktkategori

Oscilloscope Probes

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more