Hioki MR8904 CAN Unit

Sale price0,00 kr Price on quotation
Available

Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk


Analyse CAN singal module for Memory Recorders

Discover the possibilities

More information

Hioki MR8904 CAN Unit

Input CAN portNumber of ports: 2, Connector: D-sub a male 9 pin ×2
StandardsISO 11898 CAN 2.0b, ISO 11898-1, ISO 11898-2, ISO 11898-3, SAE J2411
InterfaceSelectable: High-speed CAN, Low-speed CAN, or Single-wire CAN by port (with built-in corresponding transceiver)
Transmit ACKON/OFF for transmitting a ACK for receiving CAN signal with the MR8904
TerminatorON/OFF via commands, 120 Ω ±10 Ω built-in resistance
Baud rate50 kbps to 1 Mbps at “High-speed”, 10 kbps to 125 kbps at “Low-speed”, 10 kbps to 83.3 kbps at “Single-wire”
Analyzed signal output channelUp to 15 analog channels each equivalent to a 16-bit analog signalUp to 16 logic channels each equivalent to a 1-bit logic signal
Signal form1-bit signal: 1 channel of Logic, or 1 channel of Analog1-bit to 16-bits signal: 1 channel of Analog17-bits to 32-bits signal: 2 channels of Analog* Cannot handle signals over 32-bits
ID triggerOutput “H” level pulse to designated logic channel when receiving set ID signal* Output pulse width: 50 μs below 5 ms/div time axis, 1 sampling time at more than 10 ms/div time axis
Response timeWithin 200 μs after completely receiving CAN message
Transmit CAN messageCan transmit the setting CAN message to the CAN bus by a port
Dimensions and mass119.5 mm (4.70 in)W × 18.8 mm (0.74 in)H × 151.5mm (5.96 in)D, 185 g (6.5 oz)
AccessoriesNone