Hioki SP7001 Non-contact CAN Sensor
Use our chat for personal support. Or contact us via +45 31 33 18 19 or salg@GOmeasure.dk
Monitor CAN FD/CAN Signals Without a Sub-Harness
Discover the possibilities
More information
Description
Hioki SP7001 Non-contact CAN Sensor
The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals.
Key Features
• Acquire CAN data immediately, simply by hooking probes to the cables
• Eliminate concerns by using non-contact sensing technology
• Use in a diverse array of development and evaluation applications that demand reliability
| Detection method | Capacitive-coupled signal detection *No bare-wire connections |
|---|---|
| Detectable cables | AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) |
| Number of channels | 2 (SP7100) |
| Compatible communications speeds | SP7001, SP7002: CAN 125 kbit/s to 1 Mbit/sSP7001: CAN FD 125 kbit/s to 3 Mbit/s |
| Total delay time | 130 ns (typical) |
| CAN terminal resistance | 60 Ω (typical), built-in |
| Signal output connector | D-sub 9-pin female (CH1, CH2) |
| Operating temperature, humidity | Temperature: -40 °C to 85 °C (-40 °F to 185 °F)Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation) |
| Power supply | (1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter)(2) External power supply (10 V to 30 V DC), rated power: 3 VA |
| Dimensions and mass | SP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft)SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft)SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft) |
| Accessories (SP7001, SP7002) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1 |
| Accessories (SP7100) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1 |
Documents
Hioki SP7001 Non-contact CAN Sensor
Hioki SP7001 Non-contact CAN Sensor datasheetOptions
| SP7002-90 | Supports CAN signals, SP7002, SP7100, SP9200 set |
|---|---|
| SP7001-90 | Supports CAN FD / CAN signals, SP7001, SP7100, SP9200 set |
Video
Hioki SP7001 Non-contact CAN Sensor
The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals.
Key Features
• Acquire CAN data immediately, simply by hooking probes to the cables
• Eliminate concerns by using non-contact sensing technology
• Use in a diverse array of development and evaluation applications that demand reliability
| Detection method | Capacitive-coupled signal detection *No bare-wire connections |
|---|---|
| Detectable cables | AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in) |
| Number of channels | 2 (SP7100) |
| Compatible communications speeds | SP7001, SP7002: CAN 125 kbit/s to 1 Mbit/sSP7001: CAN FD 125 kbit/s to 3 Mbit/s |
| Total delay time | 130 ns (typical) |
| CAN terminal resistance | 60 Ω (typical), built-in |
| Signal output connector | D-sub 9-pin female (CH1, CH2) |
| Operating temperature, humidity | Temperature: -40 °C to 85 °C (-40 °F to 185 °F)Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation) |
| Power supply | (1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter)(2) External power supply (10 V to 30 V DC), rated power: 3 VA |
| Dimensions and mass | SP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft)SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft)SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft) |
| Accessories (SP7001, SP7002) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1 |
| Accessories (SP7100) | Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1 |
Hioki SP7001 Non-contact CAN Sensor
Hioki SP7001 Non-contact CAN Sensor datasheet| SP7002-90 | Supports CAN signals, SP7002, SP7100, SP9200 set |
|---|---|
| SP7001-90 | Supports CAN FD / CAN signals, SP7001, SP7100, SP9200 set |