+45 31 33 18 19

TESEQ MDS 21B Absorbing Clamp

TESEQ MDS 21B Absorbing Clamp

Price on request

  • As specified in CISPR 16-1-3/EN 55016-1-3
  • Disturbance power measuring, according to CISPR 16-2-2/EN 55016-2-2, CISPR 13/EN 55013, CISPR 14-1/EN 55014-1 and EN 50083-2
  • Excellent for using as diagnostic tool and for measurements of screening attenuation of coaxial cables
  • Supplied with 6 dB attenuator and RF cable
Categories: , Tag:

TESEQ MDS 21B Absorbing Clamp

In connection with a measuring receiver according to CISPR 16-1-1, the absorbing clamp MDS enables to measure the interference capability of radio interferers, such as domestic appliances, electric tools etc. directly; viz. by measuring the power generated by the interferer and fed to its supply cable.
The absorbing clamp measurement method (ACMM) is described in Clause 7 of CISPR 16-2-2: Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-2: Methods of measurement of disturbances and immunity – Measurement of disturbance power. The absorbing clamp itself is described in CISPR 16-1-3: Radio disturbance and immunity measuring apparatus – Ancillary equipment – Disturbance power.

Frequency range: 30 MHz to 1000 MHz
Typical clamp factor: see graph
Calibrated for receiver impedance: 50 Ω
Connector: N, female
Max. current ( f < 500 Hz ): 30 A
Max. input power for immunity tests: 5 W
Diameter of appliance power cable: up to 20 mm
Dimension (WxHxD): 610 mm x 115 mm x 80 mm
Weight: approx. 6.3 kg
Classification: for indoor use only
Operation: +5 °C up to +40 °C
Relative humidity: up to 80%

Typical clamp factor in dB (pW/µV) inclusive 6 dB attenuator and 5 m cable RG223U

Clamp factor

TESEQ MDS 21B Absorbing Clamp


Additional information




Clamp, EMC Test

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more