+45 31 33 18 19
salg@GOmeasure.dk

VeEX CX380C Advanced Plant Maintenance

VeEX CX380C Advanced Plant Maintenance

Price on request

The VePAL CX380s-D3.1 is a next generation test solution designed for analog and digital cable TV networks with key maintenance tools including enhanced Spectrum Analysis with 1.8 GHz range, DOCSIS 3.1 OFDM Analysis, Digital Channel, Sweep, MPEG Analysis, and 10 Gigabit Ethernet test capabilities.

Categories: , Tag:

VeEX CX380C Advanced Plant Maintenance

The VeEX CX380C features fast 1.8 GHz Spectrum Analysis and Sweep, DOCSIS 3.1 OFDM, Full SLM, V-Test Speedtest, OPM and TDR/DMM.

Single Channel Measurement

Analog and digital carriers are very different in terms of signal content and power distribution and thus require the advanced SLM techniques supported in the CX380C. In analog mode, video and audio levels, V/A, Adjacent Channel, C/N, and HUM are measured.

In digital mode, average power, MER, Pre-BER, Post-BER, Error seconds and constellation diagram are displayed. User programmable location thresholds and test point compensation are useful utilities enabling fast, simple and automated testing of carrier signals.’

Advanced Digital Channel Analysis

Digital pictures do not show signal impairment until it is too late because the margin between acceptable quality and failure is quite small.

Constellation Diagrams

A valuable tool to help detect the presence of noise, phase jitter, interference, gain compression, laser clipping and ingress, all of which impact overall signal quality and thus reduces Modulation Error Ratio (MER).

Adaptive Equalization

The built-in equalizer does a great job of improving MER of a QAM signal, but it is also important for technicians to know how hard the system is working to ensure adequate margin for system degradation. The active equalizer taps are displayed graphically providing an insightful view of which taps are working harder to overcome impairments. Frequency Response and Group Delay provides powerful diagnostic capability.

Poor frequency response and group delay affect QAM signal integrity. Typical culprits are marginally balanced amplifiers. The equalizer can also be turned off to enable further troubleshooting of marginal amplifiers.

True Spectrum Analyzer

The CX380C offers a fast and powerful Spectrum Analyzer that incorporates advanced technology to capture transient ingress across a wide frequency range with 70 dB display range. Adjustable RBW, Signal Type, and Sweep settings optimize signal representation and noise floor performance.

The frequency range is 5 MHz to 1.8 GHz, fully supporting the DOCSIS 3.1/4.0 specification. The large 7” high resolution TFT LCD features a fast refresh rate, preserving and displaying the finest spectrum details. Touch-screen control allows rapid on-the-fly changing of test parameters and simplifies measurements while horizontal and vertical markers and min/max hold displays signal values instantly and varying signal parameters over time.

Test profiles consisting of user-settable parameters such as CF, Span, RBW, and Marker positions can be saved and recalled for repeated testing. Waveform storage enables a user to compare and contrast a captured signal versus a current measurement, in both superimposed or split screen views.

Laser Clipping

Ingress and impulse noise can cause signal clipping when upstream fiber amplifier inputs are presented with excessive power levels. As more carriers are added to the return path using channel bonding, composite power to the laser will increase.

Common Path Intermodulation Distortion (CPID/CPIM)

Spurious signals appearing in the upstream composed of distortion products of the downstream signals. Lower frequency components are passed through the diplex filter and amplified by the return amplifier. Common Path Distortions are intermittent by nature and are directly related to poor connections, corrosion, kinks and radial cracks in the cable.

Upstream Ingress

The return path is more susceptible to RF impairments because this frequency spectrum is heavily used for Ham and Citizen Band radio transmissions. Interference is not only limited to RF transmissions; Impulse noise generated by electric motors, switches, lightning strikes, high voltage power lines, vehicle ignitions, or household electrical appliances at the subscriber premise are particularly damaging to data transmissions where short bursts of interference can seriously reduce data throughput.

The return path is also very vulnerable to a phenomenon known as Noise funneling. The summation of all unwanted noise (Gaussian, ingress and impulse noise) coming from both subscribers and the cable plant itself affects the return transmission system and needs to be monitored.

 

PLATFORM HIGHLIGHTS

KEY FEATURES

  • Robust, lightweight chassis packed with powerful features for demanding environments and test conditions
  • High resolution color 7” touch-screen with graphical user interface
  • Ethernet LAN management port for remote control, back office applications and workforce management
  • Fast and efficient test result transfer to USB memory stick or FTP upload via LAN, DOCSIS, USB WiFi, USB data modem or USB Bluetooth
  • Maintain instrument software, manage test setups and channel tables, process measurement results and generate customer test reports using included ReVeal™ PC software
  • Extend field testing time using interchangeable Li-ion battery pack(s)
  • Ability to lock user interface to prevent unwanted human interference during long-term testing
  • WiFi Wiz with InSSiDer SSID Analysis*
  • Digital Fiber Inspection Scope USB accessory*
  • OPX-BOXe OTDR USB accessory*
  • Fast 1.8 GHz Spectrum Analyzer
  • Full compatibility with CaLan® 3010H+ Sweep System, for Forward Path to 1.8 GHz and Return Path to 204 MHz*
  • Comprehensive SLM measurements including fast VeCheck Full Band Scan, Tilt and Single Channel
  • In Service Sweep
  • Advanced Digital measurements (MER, BER, Equalizer, HUM, Center Frequency Error, Symbol Rate Error, Frequency Response, Group Delay)
  • DOCSIS 3.1 Cable Modem with true OFDM Analysis
  • Subcarrier Scan (patented)
  • V-Test Throughput tests for both RF and Layer 4+ interfaces
  • V-Perf Layer 4+ TCP Test*
  • Physical layer cable testing with TDR* and DMM*
  • Optical Power Meter*

 

For more information: VeEX

Click here for related products: CATV Analyzers

 

 

 

 

VeEX CX380C Advanced Plant Maintenance

Datasheet:

VeEX CX380C Datasheet


 

 

 

 

 

Additional information

Producent

VeEX

Produktkategori

CaTV Analyzers

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more