Hioki CT6876 AC/DC Current Sensor
Price on request
Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6876 is a DC to 1.5MHz/1000A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners and other next generation devices. CAT III 1000 V
Hioki CT6876 AC/DC Current Sensor
Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6876 is a DC to 1.5MHz/1000A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners and other next generation devices. CAT III 1000 V
Key Features
• The ideal current sensor for measuring large1000 A currents in EV, HEV, and PHEV
• Strengthened shield improves noise resistance to accurately measure current buried in noise
• Flat frequency characteristics and CMRR performance to achieve high accuracy measurement
• More enhanced environmental resistance performance than ever before with operating temperature range of -40 to 85°C
• Basic accuracy of ± 0.04% and phase ± 0.1°
• Good frequency characteristics over wide band of DC to 1.5 MHz (amplitude) and DC to 1 MHz (phase)
• Ideal for advanced fields such as photovoltaics and fuel cells to evaluate the charge / discharge of batteries and secondary side of inverters
• Connect with oscilloscopes or Hioki Memory HiCorders (using SENSOR UNIT) to monitor waveforms
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
Rated current | 1000 A AC/DC |
---|---|
Max. allowable input | Within the derating range, up to ±1800 Apeak (design value) allowed at 40°C or less for 20 ms or less |
Frequency bandwidth | Amplitude: DC to 1.5 MHz (CT6876), DC to 1.2 MHz (CT6876-01) Phase: DC to 1 MHz |
Basic accuracy | (DC, 45 Hz ≤ f ≤ 66 Hz) Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.1° |
Output voltage rate | 2 mV / A rated (This device outputs AC+DC voltage via the Sensor Unit. Use with voltage input equipment with high input impedance such as 1 MΩ) |
Max. rated voltage to earth | 1000 V AC/DC (50/60 Hz, CAT III ) |
Core diameter | φ 36 mm (1.42 in) |
Operating temperature, humidity | -40°C to +85°C (-40°F to 185°F), 80% RH or less (with no condensation) |
Power supply | Power suppled via the Power Analyzer PW6001, PW3390, or Sensor Unit CT9555, CT9556, CT9557 |
Max. rated power | 7.5 VA max. (at 1000 A/55 Hz) |
Dimensions and mass | 160 mm (6.30 in)W × 112 mm (4.41 in)H × 50 mm (1.97 in)D, CT6876: 950 g (33.5 oz), cable length 3 m (9.84 ft), CT6876-01: 1250 g (44.1 oz), cable length 10 m (32.81 ft) |
Accessories | Instruction manual ×1, Mark bands ×6, Operating precautions ×1 |
Compatible models
Compatible models | CT6876 |
---|---|
Power Analyzer PW6001, PW3390 | Ok |
Power Analyzer 3390 | Attention (Requires CT9901) CT ratio 2 |
Power HiTester 3193 series | Attention (Requires CT9901) CT ratio 2 |
Current Unit 8971 | Attention (Requires the 9318, CT9901) CT ratio 2 |
Hioki CT6876 AC/DC Current Sensor
Hioki CT6876 AC/DC Current Sensor
CT6876 | 1000 A AC/DC, ME15W terminal, 3 m (9.84 ft) cable length |
---|---|
CT6876-01 | 1000 A AC/DC, ME15W terminal, 10 m (32.81 ft) cable length |
Additional information
Producent | Hioki |
---|---|
Produktkategori | Oscilloscope Probes |