+45 31 33 18 19
salg@GOmeasure.dk

Aim-TTi EL155R Power Supply 0-15V/0-5A

Aim-TTi EL155R Power Supply 0-15V/0-5A

Price on request

  • Single outputs, 30V/1A, 18V/3.3A, 56V/1.1A, 15V/5A, 30V/3A
  • Single, dual or triple outputs, 30V/2A
  • Independent digital voltage and current meters  for each output with 4 digit resolution
  • Switchable local or remote sensing
  • Constant voltage or constant current operation
  • Compact design uses less bench space
  • Silent fan-free cooling
  • DC output switches, automatic mode indication
  • RS232 or USB controlled models available (30V/2A single)

Aim-TTi EL155R Power Supply 0-15V/0-5A

The Aim-TTi EL155R has been developed from the top selling EL series. By adding four digit meters and switchable remote sensing, the EL-R series offers much higher precision whilst retaining the simplicity of operation which many bench-top power supply users prefer.

Eight models are offered including single, dual and triple outputs and covering a power range of 30 watts up to 130 watts.

Linear regulation

All EL-R series models* use true linear regulation for the best possible performance. Excellent line and load regulation is matched by very low output noise and good transient response.

Four digit meters

The EL-R series incorporates separate voltage and current meters on each main output with a resolution of 10mV and 1mA. The fixed resolution avoids the misinterpretation of readings that can occur with auto-ranging 3 or 3½ digit meters where the decimal point position moves as the reading changes.

Remote Sensing

Each main output incorporates remote sense terminals that can be enabled or disabled at the flick of a switch. Remote sensing is essential for maintaining precise regulation at the load and true metering of the load voltage. Many other power supplies omit remote sense, and quote regulation figures that could never be achieved in practice. N.B. A 2 metre length of a 24/0.2 wire pair has a resistance of around 0.1 W. For a 5V load drawing 3A the metering error without remote sense would be 0.3V and the effective full current load regulation would be around 6%, against a quoted figure of perhaps 0.01% for the power supply itself.

DC output switches

Each main output has a DC on-off switch. This enables voltage and current settings to be viewed before the load is connected and allows multiple outputs to be controlled individually. Surprisingly, many power supplies omit this essential feature.

Constant voltage or constant current

Each main output can operate in constant voltage or constant current mode with automatic crossover and mode indication. Coarse and fine voltage controls are provided. The current control is logarithmic enabling low current levels to be set accurately.

Silent cooling

All EL-R series models use convection cooling and are entirely free of fan noise.

For more information: Aim-TTi EL-R Series

Aim-TTi EL155R Power Supply 0-15V/0-5A

Aim-TTi EL and EX Series Datasheet

Additional information

Producent

Aim-TTi

Produktkategori

DC Power Supplies, Sources and Supplies

Dc ac

DC

Effekt

75 W

Spaending

15 V

Stroem

5 A

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more