+45 31 33 18 19

Hioki SP7001 Non-contact CAN Sensor

Hioki SP7001 Non-contact CAN Sensor

Price on request

Monitor CAN FD/CAN Signals Without a Sub-Harness

Hioki SP7001 Non-contact CAN Sensor

The SP7001 and SP7002 are CAN and CAN FD signal sensors that use non-contact technology to accurately capture CAN bus signals necessary for vehicle and next generation equipment evaluation and development. Improve testing productivity and efficiency by eliminating the need to peel away cable insulation or use a sub-harness that is traditionally required to obtain signals.

Key Features

• Acquire CAN data immediately, simply by hooking probes to the cables

• Eliminate concerns by using non-contact sensing technology

• Use in a diverse array of development and evaluation applications that demand reliability

Detection method Capacitive-coupled signal detection *No bare-wire connections
Detectable cables AVS/AVSS-compliant cables, External diameter: 1.2 mm (0.05 in) to 2.0 mm (0.08 in)
Number of channels 2 (SP7100)
Compatible communications speeds SP7001, SP7002: CAN 125 kbit/s to 1 Mbit/s
SP7001: CAN FD 125 kbit/s to 3 Mbit/s
Total delay time 130 ns (typical)
CAN terminal resistance 60 Ω (typical), built-in
Signal output connector D-sub 9-pin female (CH1, CH2)
Operating temperature, humidity Temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Humidity: -40 °C to 60 °C (-40 °F to 140 °F), 80% RH or less (with no condensation), 60 °C to 85 °C (140 °F to 185 °F), 60% RH or less (with no condensation)
Power supply (1) AC Adapter Z1008 (100 V to 240 V AC), rated power: 8 VA (including AC adapter)
(2) External power supply (10 V to 30 V DC), rated power: 3 VA
Dimensions and mass SP7001, SP7002: 44 mm (1.73 in) W × 85 mm (3.35 in) H × 20 mm (0.79 in) D, 180 g (6.3 oz), Cable length: 2.5 m (8.20 ft)
SP7100: 55 mm (2.17 in) W × 120 mm (4.72 in) H × 25 mm (0.98 in) D, 130 g (4.6 oz), Cable length: 0.3 m (0.98 ft)
SP9200: Probe: φ 11.6 mm (0.46 in) × 33.7 mm (1.33 in) H, Guard hook: φ 5 mm (0.20 in) × 11.8 mm (0.46 in) H, 26 g, Cable length: 0.5 m (1.64 ft)
Accessories (SP7001, SP7002) Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1
Accessories (SP7100) Quick stard manual (Japanese and English) ×1 each, Operating precautions ×1, Spiral tube ×1, Power cable L9500 ×1, Alligator clip ×1, Ground connection cable ×1

Hioki SP7001 Non-contact CAN Sensor

Hioki SP7001 Non-contact CAN Sensor datasheet

SP7002-90 Supports CAN signals, SP7002, SP7100, SP9200 set
SP7001-90 Supports CAN FD / CAN signals, SP7001, SP7100, SP9200 set

Additional information




Memory Recorder & Logger, Switching and Data Aquisition

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more