Pendulum F20A Single Channel High Voltage Linear Amplifier
Price on request
The Pendulum Instruments High Voltage Linear Amplifier F20A has a fixed amplification of 20 times and capable of bipolar high voltage output of ±150V. Any signal source with amplitude up to ±10 V can be used as an input device. The input amplitude should normally be kept within ±7.5 V. This is most important since the input protection network will limit the signal amplitude and cause clipping. The F20A High Voltage Linear Amplifier is equipped with a microfuse rated at 15 mA, which will be blown if the input voltage exceeds 300% of the maximum.
Pendulum F20A Single Channel High Voltage Linear Amplifier
The maximum capacitive load is set at the factory to 400 V/µs which yields the load limit of 400 pF. The continuous output current limit is 185 mA and the output power limit is ca 30 W.
FREQUENCY RESPONSE
Full and small-signal frequency responses without load (red and orange marks) and with 400 pF capacitive load (blue and green marks), respectively, are shown in the diagram below:
Pendulum F20A Single Channel High Voltage Linear Amplifier
Pendulum F20A Single Channel High Voltage Linear Amplifier datasheet
Additional information
Producent | Pendulum |
---|---|
Produktkategori | Amplifiers |